Getting on with it. COVID-19, Creative Technologies and the future of the built environment.

That’s really all it takes to bring a little fresh green Springyness into your world!

Once you have the gate in the opening and you start to attach the ‘first attempt’ u-bolt, you will quickly see if that particular size will work and if not, what changes are needed for successful installation..If everything works correctly, you’re now able to place the gate in the opening and lock in place by tightening the wing-nuts and later remove the gate by loosing the wing-nuts..

Hopefully you found this easier to understand than it was to explain.. Courtenay here: Thanks, Chris!I have 2 notes that I want to add.First, make sure that the scratchy ends of the U bolts are on the.

of the baby gate, not the side where the baby will be hanging out.Secondly, if you want to make your gate a little prettier, go ahead and spray paint the hardware before you install it.

I would use an oil rubbed bronze or a color that matches your crib.

We didn’t though because honestly, at this point, as long as it works we’re happy!.So I really have no choice but to keep cleaning this magical brush and hope it lasts us at least another 8 years!.

I clean the brush out quickly after each use, but of course there’s a lot of stuff that gets stuck deep down in there that needs a little extra help.As you can tell, she has a fluffy light blue blanket and the fuzz from that always seems to end up in the hairbrush, and those old stickers on there that are peeling off look pretty terrible too.

It’s not a pretty situation!.If you have a hair brush that looks something like this, here’s what you do!.